Warehouse, production, label, stock and asset software that works with the barcode printers, scanners and mobile computers we supply, and the Windows and Android apps we set up for your devices.
The fingerprint version of the Chainway C71 handheld with a capacitive sensor: the TCS1 (FIPS 201, STQC) or the TLK1NC02 (FIPS 201, FBI), both 508 dpi, on a 5.2-inch Android 11 / 13 device that weighs 314 g.
Fingerprint sensor
Capacitive TCS1 or TLK1NC02, 508 dpi
Certifications Chainway lists
TCS1: FIPS 201, STQC · TLK1NC02: FIPS 201, FBI
OS
Android 11 / 13, GMS
Display
5.2-inch, 1920 × 1080, Corning Gorilla Glass
Battery
5000 mAh, over 12 hours of continuous use (depending on user environment)
Chainway C71 Biometrics Reader price in India: on written quotation. Share the model, quantity and city; we reply within one working day (Monday to Saturday, 9:30 AM to 6:30 PM).
Covered by the manufacturer's warranty. The warranty period, terms and conditions are as declared by Chainway.
Why the C71 Biometrics Reader
A phone-sized handheld with a capacitive fingerprint sensor
The Chainway C71 Biometrics Reader is the version of the C71 handheld with a capacitive fingerprint sensor. Chainway India lists it under Biometric Readers with two capacitive sensors, the TCS1 and the TLK1NC02, both at 508 dpi. Chainway says the handheld is ideal for population census, security and protection.
Two capacitive sensors to choose from
Chainway lists the TCS1 with a 12.8 × 18.0 mm sensing area at 508 dpi, 8-bit greylevel, and the TLK1NC02 with a 14.0 × 22.0 mm sensing area at 508 dpi, 256 greylevel. Tell us which one your project names and we quote that sensor.
Certifications named for each sensor
Chainway lists FIPS 201 and STQC for the TCS1, and FIPS 201 and FBI for the TLK1NC02. The certification belongs to the sensor, so name the one your tender asks for when you enquire.
Fake finger detection and an encrypted channel
For both sensors Chainway lists fake finger detection as supported by the SDK, and AES, DES key encryption of the host communication channel.
Formats your software can read
Chainway lists ISO 19794, WSQ, ANSI 378 and JPEG2000 under format extraction for both sensors. Check that list against the format your application expects.
Barcodes, NFC cards and photos on the same device
Barcode scanning is optional, with a 1D or a 2D scan engine. NFC reads 13.56 MHz cards at 2-4 cm, and the rear camera is 13 MP with autofocus and flash.
Over 12 hours of continuous use
Chainway gives over 12 hours of continuous use from the 5000 mAh battery, depending on user environment, and over 350 hours of standby. Charging takes 3-4 hours.
Sealed and drop-tested
Chainway rates the C71 Biometrics Reader IP65 / IP67 and lists multiple 1.8 m drops to concrete (at least 20 times) across the operating temperature range, and 1,000 tumbles from 0.5 m at room temperature.
These are the points buyers in India ask us about the C71 Biometrics Reader. Mention the ones that apply to you when you request a quote.
Name the sensor and the certification your project asks for
Tell us which fingerprint certification your tender names. Chainway lists FIPS 201 and STQC for the TCS1, and FIPS 201 and FBI for the TLK1NC02. We quote the matching sensor and confirm it in the quotation.
Check your SIM provider's 4G bands
Check your SIM provider's bands against Chainway India's list for the C71 Biometrics Reader: 4G B1, B2, B3, B4, B5, B7, B8, B12, B17, B20, B28A, B28B, B34, B38, B39, B40 and B41. We confirm the bands of the unit we quote in the quotation.
Say which memory you need
Chainway India lists 3 GB + 32 GB, with 4 GB + 64 GB as an option. Chainway's global site lists 4 GB + 128 GB, with 4 GB + 64 GB as an option. We confirm the memory of the unit in the quotation.
This version has no UHF RFID reader listed
Chainway's listing, product page and data sheet for the C71 Biometrics Reader give no UHF RFID reader. If you also read UHF tags, ask us about the C71 Built-in RFID Reader.
Chainway Software Development Kit (capacitive fingerprint based on Crossmatch SDK); Java; Eclipse / Android Studio
Barcode, NFC and camera
1D linear scanner (optional)
Honeywell N4313
2D imager scanner (optional)
Zebra SE4710 / SE4750SR / SE4750MR / SE4750DP; Honeywell N6603 (Chainway global site adds the CM60)
1D symbologies
UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
2D symbologies
PDF417, MicroPDF417, Composite, RSS, TLC-39, Data Matrix, QR code, Micro QR code, Aztec, MaxiCode; postal codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.
NFC
13.56 MHz; ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.; M1 card (S50, S70), CPU card, NFC tags; 2-4 cm
Cameras
Rear 13 MP autofocus with flash; front 5 MP (optional)
Display, keys and power
Display
5.2-inch IPS LTPS, 1920 × 1080
Touch panel
Corning Gorilla Glass, multi-touch; gloves and wet hands supported
Keys
4 front keys, 1 power key, 2 scan keys, 1 multifunctional key
Sensors
Light sensor, proximity sensor, gravity sensor
Audio and alerts
2 microphones, 1 for noise cancellation; 1 speaker; receiver; sound, LED indicator, vibrator
Battery
Li-ion, rechargeable, 5000 mAh; standby over 350 hours; continuous use over 12 hours (depending on user environment); charging time 3-4 hours
USB 2.0 Type-C, OTG, Type-C headphones supported; 1 slot for SIM card, 1 slot for SIM or TF card
Physical and environment
Dimensions
164.2 × 78.8 × 17.5 mm; thickest point 24.5 mm
Weight
314 g
Operating temperature
-20 °C to 50 °C
Storage temperature
-40 °C to 70 °C
Humidity
5% to 95% RH, non-condensing
Drops
Multiple 1.8 m drops (at least 20 times) to concrete across the operating temperature range
Tumbles
1,000 × 0.5 m at room temperature
Sealing
IP65 / IP67 per IEC sealing specifications
ESD
±15 kV air discharge, ±6 kV conductive discharge
Warranty
Warranty
Covered by the manufacturer's warranty. The warranty period, terms and conditions are as declared by Chainway.
Optional accessories
Screen protector
Charging cradle
Holster
Rugged rubber boot
4-slots charging cradle set
Chainway India's listing names no accessories. Chainway's C71 Biometrics Reader page (Chainway global site) marks these as optional; it lists three charging cradles. Ask for them in the same quotation, and we confirm what fits this version in the quotation.
Specifications from Chainway's published documents, last checked 18 November 2026.
Makers can change specifications without notice.
About our product information
Compare
C71 Biometrics Reader or another model?
Chainway C71 Biometrics Reader compared with similar models
FIPS PIV IQS / ISO 19794-4, MINEX and FIPS 201 compliant, STQC
UHF RFID
None listed
3 m MR6 / 3 m M750 / 4 m Alien H3 (built-in)
None listed
Thickest point
24.5 mm
17.5 mm (no thickest-point figure listed)
31.5 mm
Weight
314 g
321 g
314 g
Sealing
IP65 / IP67
IP65 / IP67
IP65 (Chainway writes 'IP65 dependent')
Best for
Identity verification with a capacitive fingerprint sensor
Reading UHF RFID tags at close range
Identity verification with the CBM-E3 optical sensor
Exploring for a different use?
If your job differs from what the C71 Biometrics Reader is built for, these Chainway models may fit it better:
Buyers who do not need a fingerprint sensor and read UHF RFID tags often look at the
Chainway C71 Built-in RFID Reader (the base C71 with a built-in UHF reader, 321 g).
Buyers who need the optical Morpho CBM-E3 sensor often look at the
Chainway C71 Optical Fingerprint Scanner (500 dpi optical sensor; MINEX and FIPS 201 compliant, STQC as Chainway lists it).
Buyers who need long-range RFID and a fingerprint sensor in one device often look at the
Chainway C5 Fingerprint Scanner (TLK1NC02 fingerprint sensor on a UHF RFID reader, up to 30-33 m with Chainway's test tags).
What is the price of the Chainway C71 Biometrics Reader in India?
The C71 Biometrics Reader price depends on the accessories (cradles, spare batteries) and the quantity. We do not publish prices: share the model, quantity and city, and we send a written quotation with current pricing and
delivery time, replying within one working day.
Which fingerprint sensors does the Chainway C71 Biometrics Reader offer?
Chainway lists two capacitive sensors for it: the TCS1, with a 12.8 × 18.0 mm sensing area at 508 dpi, and the TLK1NC02, with a 14.0 × 22.0 mm sensing area at 508 dpi. Chainway's documents for it also list the Optical Morpho CBM-E3; see the C71 Optical Fingerprint Scanner page. Tell us which one your project names and we confirm the sensor in the quotation.
Which fingerprint certifications does Chainway list for the C71 Biometrics Reader?
Chainway lists FIPS 201 and STQC for the TCS1 sensor, and FIPS 201 and FBI for the TLK1NC02 sensor. The certification belongs to the sensor, so name the one your tender asks for and we quote the matching version.
How is the C71 Biometrics Reader different from the C71 Built-in RFID Reader?
The Biometrics Reader has a capacitive fingerprint sensor and no UHF RFID reader in Chainway's documents. The Built-in RFID Reader has a UHF reader that Chainway rates at up to 3-4 m with its test tags. The Biometrics Reader weighs 314 g and is 24.5 mm at its thickest point; the Built-in RFID Reader weighs 321 g. Both have the 5.2-inch screen and the 5000 mAh battery.
How is it different from the C71 Optical Fingerprint Scanner?
The sensor. The Biometrics Reader uses a capacitive TCS1 or TLK1NC02 sensor at 508 dpi and is 24.5 mm at its thickest point. The Optical Fingerprint Scanner uses the Optical Morpho CBM-E3 at 500 dpi and is 31.5 mm at its thickest point. Chainway lists different certifications for each sensor, so start from the one your project names.
Does the C71 Biometrics Reader read UHF RFID tags?
Chainway's India listing, product page and data sheet for the C71 Biometrics Reader give no UHF RFID reader. It reads 13.56 MHz NFC cards at 2-4 cm. For UHF tags, look at the C71 Built-in RFID Reader.
Does the C71 Biometrics Reader scan barcodes?
Barcode scanning is optional. Chainway India lists a 1D scanner (Honeywell N4313) or a 2D imager (Zebra SE4710, SE4750SR, SE4750MR, SE4750DP or Honeywell N6603). Send us your labels and we confirm the scan engine in the quotation.
Can Allmark install the C71 Biometrics Reader and connect it to our software?
Yes. We install the C71 Biometrics Reader at your site, connect it to your ERP, warehouse or billing software (our own warehouse management system included) and train your team. Tell us the software when you ask for a quote, and we include the setup in the quotation.
Get a written C71 Biometrics Reader quote with accessories and setup
Send the work, the apps your team uses and how many devices you need; we reply with a written quotation.
Since 2014 · 2000+ customers · 75,000+ devices installed · On-site installation & training · Software & ERP integration