Warehouse, production, label, stock and asset software that works with the barcode printers, scanners and mobile computers we supply, plus ready-to-install apps.
A corded, IP64-sealed handheld scanner that reads laser-etched and dot-peened direct part marks as well as printed 1D and 2D barcodes, for auto-component, electronics, medical-device and engineering plants.
NVH300 price in India: ask our team for today's competitive price. Share your requirement and budget, and we will help you choose the right configuration and send a written quotation with current pricing and delivery time.
Covered by the manufacturer's warranty. The warranty period, terms and conditions are as declared by Newland.
Built to read marks on metal, plastic and circuit boards
Newland's current NVH300 is the second version (V2), listed on its India and Asia site as the NVH300-DP and the higher-resolution NVH300X-HDP. This page describes the V2; the earlier model, sold as the 'NVH300 Angler DP', had a 1.8 m drop rating (2.4 m now) and USB and RS-232 only (USB, RS-232 and Ethernet now).
Three lights for difficult marks
White direct light plus rings of red and blue diffuse LEDs. Newland designs the mix for reflective, curved and coloured surfaces and different backgrounds, where a single light washes out a laser-etched or dot-peened mark.
Two resolutions to match the code size
The NVH300-DP has a 1280 × 960 sensor and reads codes down to 1.67 mil (1D) and 3 mil (2D); a 10 mil Data Matrix reads from 0 to 130 mm. The NVH300X-HDP has a 1920 × 1200 sensor for codes down to 1.25 mil (1D) and 1.67 mil (2D), read close up: 25-28 mm for a 1.67 mil Data Matrix.
Help with faint and low-contrast codes
Newland lists AI-based barcode positioning for low-contrast codes and intelligent learning that adjusts decoding parameters to the scene, on its UIMG decoding system. The minimum symbol contrast is 15%.
Made for the shop floor
IP64 sealing, 2.4 m drops, operation from -20 °C to 50 °C and ESD protection of ±16 kV air and ±8 kV direct discharge.
USB, RS-232 or Ethernet
One scanner with three host interfaces. RS-232 and Ethernet use a 5 V, 1.5 A adapter (input 100-240 V). Newland's Acuscan reads only the code at the centre of the laser aimer when codes sit close together.
Set up with NSet
Newland's NSet configuration software sets symbologies, illumination and output, and a USB-COM driver is available for software that expects a serial port. Allmark can set the scanner up on site and connect it to your MES, ERP or traceability software.
Used in
Auto-component plants
Electronics and PCB assembly
Medical-device and surgical-instrument makers
Engineering and machining shops
Pharmaceutical and bulk-drug (API) packaging
For buyers in India
Using the NVH300 in India
These are the points buyers in India ask us about the NVH300. Mention the ones that apply to you when you request a quote.
Reads QR codes on API drums and inner packs
The NVH300-DP reads both drum labels and small codes on inner packs, such as the QR codes on bulk-drug (API) labels: a 15 mil QR from 0 to 170 mm and a 5 mil QR from 10 to 85 mm. The NVH300 decodes QR Code and Data Matrix.
Reads EAN-13 and ITF-14; ask about GS1 DataBar
Ask us before you rely on GS1 DataBar or GS1-128 with the NVH300, because neither is named on Newland's V2 symbology list. That list for the NVH300 V2 includes EAN-13 (GS1 India numbers start with 890), EAN-8, UPC, ITF-14 for cartons, Code 128, Code 39, Code 93, Codabar, QR, Data Matrix, PDF417, Micro QR and Aztec.
Let it warm up before use in humid plants
A scanner brought from an air-conditioned QC room into humid air can mist over, so let the NVH300 warm up first; its humidity rating is 5-95% non-condensing. It is rated to work from -20 °C to 50 °C and to be stored up to 70 °C. IP64 means dust-tight and protected against splashing water.
Runs on USB; adapter suits 230 V mains
On USB the NVH300 runs from the port: it draws 438 mA typical and 476 mA maximum at 5 V, within the 500 mA a USB 2.0 port supplies. For RS-232 and Ethernet, Newland lists a 5 V, 1.5 A adapter with a 100-240 V input. That covers India's 230 V and 240 V mains.
Specifications
Newland NVH300 technical specifications
Newland NVH300 specifications
General
Versions
NVH300-DP, product type NLS-NVH300-V2-DP; NVH300X-HDP, product type NLS-NVH300X-V2-HDP
Decode Capability
1D, 2D, including DPM (laser-etched and dot-peened marks)
USB: connects to the host. RS-232 and Ethernet: connect to the host with a 5 V, 1.5 A adapter (input 100-240 V)
Input voltage
5 VDC ±5%
Current at 5 VDC
Operating: 438 mA typical, 476 mA maximum
Power consumption
2,190 mW typical
Physical and environment
Dimensions
76 (W) × 107 (D) × 185 (H) mm
Weight
245 g
Operating temperature
-20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature
-40 °C to 70 °C (-40 °F to 158 °F)
Humidity
5% to 95%, non-condensing
Electrostatic discharge (ESD)
±16 kV air discharge; ±8 kV direct discharge
Drop
2.4 m
Sealing
IP64
Software
Configuration tool
Newland NSet
Drivers
USB-COM driver
Warranty
Warranty
Covered by the manufacturer's warranty. The warranty period, terms and conditions are as declared by Newland.
Optional accessories
Smart foldable stand (STD300)
3 m coiled RJ to RS-232 cable (CBL-RJDB-C30)
3 m coiled RJ to USB cable (CBL-RJUA-C30)
2 m straight RJ to RS-232 cable (CBL-RJDB-S20-3)
2 m straight RJ to USB-A cable (CBL-RJUA-S20-4)
5 V, 1.5 A power adapter for RS-232 and Ethernet use
Newland lists the cables separately: tell us USB, RS-232 or Ethernet and coiled or straight, and add the stand to the same quotation if you need it.
Specifications from Newland's published documents, last checked 9 October 2026.
Makers can change specifications without notice; we confirm the exact model and configuration in your written quotation.
About our product information
More detail
More about the Newland NVH300
Industrial Scanner Range
The NVH300 is part of Newland’s industrial scanner range, designed for high-end and specialist scanning requirements that include an element or combination of: industrial protection, high-density and DPM code reading.
DPM Decoding
With a new generation of industrial decoding, the NVH300 can read laser-marked and dot-peened barcodes on many types of surfaces, such as surgical equipment, machined engineering parts and printed circuit boards.
Advanced illumination
The NVH300 uses three different light sources to combat the contrast variances encountered from different materials marked by the DPM codes. The issues confronted by the reflection and distortion of barcodes can be negated by using different colored light projected from different angles.
Intelligent Configuration
The NVH300 combines its three illumination colours and light angles with Newland's intelligent learning, which adjusts the decoding parameters automatically to the code and surface in front of it, and AI-based positioning that finds low-contrast codes.
Nset
Newland’s industrial scanner range comes with its own advanced configuration software. NSet is a more DPM and high-density feature-packed version of Newland’s EasySet configuration software.
Industrial Design
The NVH300 is fortified inside and out. With an IP64 sealed housing and a 2.4 m drop rating, it is a DPM specialist built for industrial use. Dirty, harsh environments are no deterrent to the NVH300.
Very small, dense marks read close up, such as on PCBs
A lighter corded industrial scanner for labels and DPM
Exploring for a different use?
If your job differs from what the NVH300 is built for, this Newland model may fit it better:
Buyers who want a lighter handheld, or a cordless scanner for marked parts, often look at the
Newland NVH220 (corded version 160 g without cable; Bluetooth version up to 150 m line of sight).
The NVH300 price depends on the cable or accessories you need and the quantity. Ask our team for today's competitive price: share your requirement and budget,
and we will help you choose the right configuration and send a written quotation with current pricing and
delivery time.
Is the NVH300 still available in India?
Yes. Allmark supplies the NVH300 in India. Newland's India and Asia site lists it as a current scanner in its second version (V2), as the NVH300-DP and the NVH300X-HDP, in 2026. Newland's discontinued list names only the older NVH300-HD (4 December 2025). The earlier model, sold as the 'NVH300 Angler DP', had a 1.8 m drop rating and RS-232 and USB only.
NVH300-DP or NVH300X-HDP: which should we choose?
Choose by the size of your marks. The NVH300-DP has a 1280 × 960 sensor, reads down to 1.67 mil (1D) and 3 mil (2D), and reads a 10 mil Data Matrix from 0 to 130 mm, which suits most etched and peened parts. The NVH300X-HDP has a 1920 × 1200 sensor and reads down to 1.25 mil (1D) and 1.67 mil (2D), but only close up, for example 25-28 mm for a 1.67 mil Data Matrix. Both share the housing, lights and interfaces.
Can it read dot-peened and laser-etched codes on metal parts?
Yes. Newland states that the NVH300 decodes DPM codes, including laser-etched and dot-peened markings, on its UIMG decoding system. White direct light and red and blue diffuse ring lights handle reflective and curved surfaces. Reading still depends on how well the mark was made: its size, depth and contrast against the metal. The minimum symbol contrast Newland gives is 15%.
NVH300 or NVH220: what is the difference?
Both are corded Newland industrial scanners with USB, RS-232 and Ethernet, IP64 sealing and 2.4 m drop ratings. The NVH300 is the DPM specialist, with white direct light plus red and blue diffuse ring lights and a high-resolution X-HDP version for 1.67 mil codes; it weighs 245 g. The corded NVH220-HD is lighter at 160 g without cable, with a 1280 × 800 sensor and a 10 mil Data Matrix range of 15-140 mm.
How does it connect to our PC, PLC or MES?
The NVH300 has USB, RS-232 and Ethernet interfaces, with separate coiled or straight RJ cables for USB and RS-232. Over USB it is powered by the host; RS-232 and Ethernet use a 5 V, 1.5 A adapter. Newland's NSet software configures it, and a USB-COM driver lets software that expects a serial port read it over USB. Newland's India and Asia site does not list industrial Ethernet protocols for the NVH300.
Can Allmark install the NVH300 and connect it to our software?
Yes. We install the NVH300 at your site, set it to send data the way your ERP, warehouse or billing software expects (our own warehouse management system included) and train your team. Tell us the software when you ask for a quote, and we include the setup in the quotation.
Get a written NVH300 quote, set up for your software
Send what you scan, where you scan it and the software it feeds; we reply with a written quotation.
Since 2014 · 2000+ customers · 75,000+ devices installed · On-site installation & training · Software & ERP integration