IIoT
Browse IIoT
IIoT
Browse IIoT
4-inch industrial printer price in India: ask our team for today's competitive price. Share your requirement and budget, and we will help you choose the right configuration and send a written quotation with current pricing and delivery time.
Quick answer
At 203 dpi the ZT411 and MH241 print up to 14 ips and the ZX1200i+ up to 10 ips. At 300 dpi: MH341 12 ips, ZT411 10 ips, ZX1300i+ 7 ips. At 600 dpi: MH641 6 ips, ZT411 and ZX1600i+ 4 ips. Pick the resolution from your smallest barcode or text first, then check the speed.
The MH241 Series takes ribbons up to 600 m long. The ZT411 and ZX1200i+ Series take up to 450 m. All three take label rolls up to 203 mm (8 inches) across, so roll changes come at roughly the same point.
RFID encoding and the on-metal tag kit: ZT411 (Godex lists an RFID module as a project option). Linerless labels: ZT411, as a factory model or field kit. A built-in 8-inch full-roll rewinder: the P models of the MH241 Series. The ZT411 also has a factory-fitted rewind option, and Godex offers a dispenser with internal rewinder.
Which model for which job
Each job below names which of the ZT411, MH241 Series and ZX1200i+ Series suits it.
All three print 4 × 6 inch labels. At 14 ips (ZT411 and MH241) a label with a 3 mm gap takes about 0.44 s; at 10 ips (ZX1200i+) about 0.61 s.
Consider: Zebra ZT411, TSC MH241, Godex ZX1200i+
Each brand has a 600 dpi version: the ZT411 with the 600 dpi printhead (4 ips), the TSC MH641 (6 ips) and the Godex ZX1600i+ (4 ips).
Consider: Zebra ZT411, TSC MH241, Godex ZX1200i+
The ZT411 takes a UHF RFID encoder that can be added in the field, and an on-metal kit for Silverline tags up to 1.5 mm thick (203 and 300 dpi only). Godex lists an RFID read/write module as a project option.
Consider: Zebra ZT411, Godex ZX1200i+
The MH241 Series takes 600 m ribbons, and its P models wind a full 8-inch roll of printed labels inside the printer.
Consider: TSC MH241
Each one connects to an applicator: an applicator interface card in a ZT411 option slot, the GPIO and parallel factory option on the MH241 Series, or the Godex 15-pin applicator interface.
Consider: Zebra ZT411, TSC MH241, Godex ZX1200i+
Side by side
All three print 4-inch labels. The ZT411 has RFID, on-metal and linerless versions. The MH241 runs long on 600 m ribbons, and the ZX1200i+ takes media up to 118 mm wide.
| Specification | Zebra ZT411 | TSC MH241 Series | Godex ZX1200i+ Series |
|---|---|---|---|
| Best for | 4-inch labels plus RFID, on-metal tags or linerless labels | Long runs on 600 m ribbons; built-in full-roll rewinder on P models | 4-inch labels at up to 10 ips, on media up to 118 mm wide |
| Print width | 104 mm (4.09 in.) | 104 mm (4.09 in) | 104 mm (4.09 in), up to 108 mm |
| Resolution | 203, 300 or 600 dpi | 203 / 300 / 600 dpi | 203 / 300 / 600 dpi |
| Speed at each resolution | 2.4-14 ips (61-356 mm/s) at 203 dpi; 2.4-10 ips (61-254 mm/s) at 300 dpi; 1.5-4 ips (38-102 mm/s) at 600 dpi | 203 dpi: 356 mm/s (14 ips) · 300 dpi: 305 mm/s (12 ips) · 600 dpi: 152 mm/s (6 ips) | 203 dpi: 254 mm/s (10 ips) · 300 dpi: 178 mm/s (7 ips) · 600 dpi: 102 mm/s (4 ips) |
| Printer languages | ZPL, ZPL II; EPL2 (203 dpi only); XML-enabled printing; ZBI 2.0 optional | TSPL-EZD (compatible with EPL, ZPL, ZPL II, DPL) | EZPL, GEPL, GZPL, GDPL with automatic switching |
| Media width | 1.00 in. (25.4 mm) to 4.50 in. (114 mm) Tear/Cutter; 1.00 in. (25.4 mm) to 4.25 in. (108 mm) Peel/Rewind | 20-114 mm (0.79-4.5 in) | Tear-off: 25.4-118 mm (1-4.65 in) · cutter: up to 117 mm · dispenser: up to 118 mm |
| Media thickness | 0.0023 in. (0.058 mm) to 0.010 in. (0.25 mm) | 0.06-0.28 mm (2.36-11 mil) | 0.06-0.25 mm (0.0024-0.01 in) |
| Label roll | 8.0 in. (203 mm) O.D. on a 3 in. (76 mm) I.D. core | 203.2 mm (8 in) O.D. on a 38.1 mm or 76.2 mm (1.5 in or 3 in) core | 203.2 mm (8 in) O.D., 38.1-76.2 mm (1.5-3 in) core |
| Ribbon length | 1476 ft. (450 m) | 600 m | Wax, wax/resin or resin; up to 450 m, 1-inch (25.4 mm) core, 76.2 mm roll diameter |
| Ribbon width | 2.00 in. (51 mm) to 4.33 in. (110 mm) | 25.4-114.3 mm (1-4.5 in) | 30-110 mm (1.18-4.33 in) |
| Memory | RAM: 256 MB (8 MB user available) · Flash: 512 MB (64 MB user available) | 512 MB flash, 256 MB SDRAM; microSD card reader for expansion up to 32 GB | 256 MB flash (162 MB free for user storage), 256 MB SDRAM |
| Standard ports | USB 2.0, high speed; RS-232 serial (DB9F); 10/100 Ethernet; Bluetooth 4.1; dual USB Host | USB 2.0 (high speed), RS-232, Ethernet 10/100 Mbps, 2 × USB host (front, for scanner or keyboard) | USB 2.0 (Type B), RS-232 (DB-9), Ethernet 10/100 Mbps (RJ-45), 3 × USB host (Type A; 2 front, 1 rear) |
| Wireless and other port options | Dual-band 802.11ax Wi-Fi with Bluetooth 5.3; dual-band 802.11ac Wi-Fi with Bluetooth 4.2; parallel (bi-directional interface); 10/100 Ethernet; applicator interface | Factory options: GPIO (DB15F) + parallel (Centronics); internal Bluetooth 5.0 MFi (availability may vary by region) · Dealer option: Slot-in Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 4.2 combo module (availability may vary by region) | Wi-Fi (IEEE 802.11 b/g/n) and Bluetooth (BLE 5.0) combo module; parallel port adaptor; label dispenser with internal rewinder |
| Display | 4.3 in. colour touch display with menu, including RFID settings; bi-coloured status LEDs | Standard: 3.5-inch colour LCD, 320 × 240, with 6 buttons · T and P: 4.3-inch colour resistive touch screen, 480 × 272, with 6 buttons | 3.2-inch backlit colour touch screen; power button; FEED / PAUSE / CANCEL key with Ready (green) and Error (red) LED; calibration button at the rear |
| Weight | 36 lb (16.33 kg) | Standard: 15.60 kg · T: 15.70 kg · P: 18.93 kg | 13.6 kg (30 lb), excluding consumables |
| Power supply | Auto-detectable (PFC compliant) 100-240VAC, 50-60Hz; ENERGY STAR qualified | Internal switching power supply, AC 100-240 V, 50-60 Hz; 243 W total output | Auto-switching, AC 100-240 V, 50-60 Hz |
| Operating temperature | Thermal transfer = 40º to 104ºF (5º to 40ºC); Thermal direct = 32º to 104ºF (0º to 40ºC); 20% to 85% non-condensing R.H. | 0 °C to 40 °C, 25-85% humidity, non-condensing | 5 °C to 40 °C, 20-85% humidity, non-condensing |
All figures are each maker's own, as shown on each product page. The TSC and Godex columns cover the whole series: MH241, MH341 and MH641, and ZX1200i+, ZX1300i+ and ZX1600i+. Open a model for its full specification, India notes and FAQ. Maker documents checked on 8 October 2026 or later. About our product information
Two at a time
Both print up to 104 mm wide at up to 14 ips at 203 dpi. At higher resolutions the MH241 Series is rated faster: 12 against 10 ips at 300 dpi, 6 against 4 ips at 600 dpi. It also takes 600 m ribbons (450 m on the ZT411), has a microSD slot for up to 32 GB, and comes as a P model with a built-in full-roll rewinder. The ZT411 has Bluetooth 4.1 built in, a Wi-Fi 6 option, a UHF RFID encoder, the on-metal kit and a linerless version. The ZT411 uses ZPL and ZPL II (EPL2 at 203 dpi); TSC's TSPL-EZD firmware is compatible with ZPL, ZPL II, EPL and DPL.
Both come in 203, 300 and 600 dpi and take 450 m ribbons and 8-inch label rolls. The ZT411 is rated faster at 203 dpi (14 against 10 ips) and 300 dpi (10 against 7 ips); both reach 4 ips at 600 dpi. The ZX1200i+ prints up to 108 mm wide at 203 dpi, takes media up to 118 mm wide (114 mm on the ZT411), has three USB host ports and weighs 13.6 kg against 16.33 kg. The ZT411 has Bluetooth 4.1 built in and offers a UHF RFID encoder, the on-metal kit and a linerless version.
Both have 203, 300 and 600 dpi models and print 104 mm wide (the ZX1200i+ up to 108 mm at 203 dpi). The MH241 Series is rated faster at each resolution: 14, 12 and 6 ips against 10, 7 and 4 ips. It takes 600 m ribbons against 450 m, media from 20 mm wide and up to 0.28 mm thick, and has a P model with a full-roll rewinder. The ZX1200i+ Series takes media up to 118 mm wide (114 mm on the MH241), has three USB host ports against two, and weighs 13.6 kg against 15.60 kg for the standard MH241.
For buyers in India
All three are rated up to 40 °C: the ZT411 from 5 °C in thermal transfer (0 °C in direct thermal), the MH241 Series from 0 °C and the ZX1200i+ Series from 5 °C, all non-condensing. A dock or plant without cooling can pass the rating, so keep the printer in a ventilated or cooled area.
All three take 100-240 V AC at 50-60 Hz, which covers India's 230 V and 240 V mains at 50 Hz. Use a stabiliser or UPS where mains runs high.
India's licence-free UHF RFID band is 865-868 MHz. For a ZT411 with RFID or the on-metal kit, buy tags made for the ETSI band and confirm the printer's India RFID country setting before ordering.
All three print QR and Data Matrix codes, including the QR code on active pharmaceutical ingredient (API) labels. At 600 dpi a dot is about 0.04 mm across, which helps with small codes on small containers.
Questions buyers ask
It depends on the model, the resolution (203, 300 or 600 dpi), options such as a cutter, rewinder, Wi-Fi or RFID, and the quantity. Ask our team for today's competitive price: share your requirement and budget, and we will help you choose the right configuration and send a written quotation with current pricing and delivery time.
The MH241 Series takes ribbons up to 600 m long; the ZT411 and ZX1200i+ Series take up to 450 m. On 4 × 6 inch labels with a 3 mm gap, a 600 m ribbon lasts for about 3,860 labels and a 450 m ribbon for about 2,900. Allmark supplies Zebra and TSC branded ribbons on request, or its own grade of the same type; ask us about ribbons for the ZX1200i+.
All three. The ZT411 takes an optional 600 dpi printhead and prints up to 4 ips with it, but the on-metal RFID kit is not offered at 600 dpi. TSC's 600 dpi model is the MH641, at up to 6 ips. Godex's is the ZX1600i+, at up to 4 ips.
The ZT411 takes a UHF RFID encoder for EPC Gen 2 V2.1, ISO/IEC 18000-63 and RAIN RFID tags, and can be upgraded in the field. Its on-metal kit prints and encodes Silverline tags for metal assets. Godex lists an RFID read/write module for the ZX1200i+ Series as a project option. The MH241 Series page lists no RFID option.
The ZT411's own languages are ZPL and ZPL II, with EPL2 on 203 dpi models. The MH241 Series runs TSC's TSPL-EZD, which is compatible with EPL, ZPL, ZPL II and DPL. Godex lists EZPL, GEPL, GZPL and GDPL with automatic switching. Whichever you choose, print a test batch of your real label formats before you change over.
Yes, on all three. The ZT411 takes a Wi-Fi 6 card with Bluetooth 5.3, or Wi-Fi 5 with Bluetooth 4.2, in one of its two option slots. The MH241 Series takes a slot-in 802.11ac Wi-Fi module with Bluetooth 4.2; TSC says availability may vary by region. The ZX1200i+ Series takes a dealer-installed 802.11 b/g/n Wi-Fi and BLE 5.0 module.
Tell us the label size, the smallest barcode or text on it, how many you print a day and what software sends the labels. We will tell you which model fits and quote it with labels and ribbons.